HP OmniBook XE Setup Manual Download

Page: 65 / 78

Solving Problems with your OmniBook

Obtaining Repair Service

Setup Guide

Obtaining Repair Service

See “Repair Assistance” on page 59 to determine if your OmniBook must be sent in
for service. If so, prepare your OmniBook for shipment.

Important.

Back up your hard disk drive.

While your computer is being repaired, the hard disk may be replaced or
reformatted.

Hewlett-Packard cannot guarantee the return of removable components. Please
remove the following prior to sending your OmniBook in for service:

•

PC cards

•

AC adapter and power cord

•

CDs in the CD player

•

Floppy disks in the floppy disk drive

•

RAM modules that you have added

When sending your OmniBook to Hewlett-Packard, please use the original
product packaging or other substantial packaging in order to avoid damage to
the unit in transit.

Note

If the hard disk drive is defective, you will receive a replacement drive with the
original HP software.

Summary of Contents for OmniBook XE















































































Search results

Summary of Contents for OmniBook XE

Reviews:

Related manuals for OmniBook XE

Brands by name

Popular brands

HP OmniBook XE, Setup Manual

Search results

Summary of Contents for OmniBook XE

Reviews:

Related manuals for OmniBook XE

Brands by name

Popular brands