manualshive.com logo in svg

HP Omen series, Maintenance And Service Manual, Page: 8 / 96

Share
Download
HP Omen series Maintenance And Service Manual Download Page 8

Battery ............................................................................................................................................... 34
Display assembly ............................................................................................................................... 37
Hard drive ..........................................................................................................................................  39
SSD (M.2) ...........................................................................................................................................  41
Memory .............................................................................................................................................. 42
WLAN module ....................................................................................................................................  44
USB board ..........................................................................................................................................  45
Power button board ..........................................................................................................................  46
Fans ...................................................................................................................................................  48
Heat sink for hybrid graphics memory .............................................................................................  49
Heat sink for CPU and graphics .........................................................................................................  50
Speakers ............................................................................................................................................  52
System board ....................................................................................................................................  53
RTC battery ........................................................................................................................................ 55
Power connector ...............................................................................................................................  56
TouchPad ...........................................................................................................................................  58
Display panel .....................................................................................................................................  60
Camera ............................................................................................................................................... 65

6  Using Setup Utility (BIOS) ............................................................................................................................. 67

Starting Setup Utility (BIOS) ................................................................................................................................  67
Updating Setup Utility (BIOS) ..............................................................................................................................  67

Determining the BIOS version ........................................................................................................... 67
Downloading a BIOS update .............................................................................................................. 68

7  Using HP PC Hardware Diagnostics (UEFI) ....................................................................................................... 69

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ....................................................................  69

8  Backing up, restoring, and recovering ...........................................................................................................  71

Creating recovery media and backups ................................................................................................................  71

Creating HP Recovery media (select products only) ......................................................................... 71

Using Windows tools ...........................................................................................................................................  72
Restore and recovery ........................................................................................................................................... 73

Recovering using HP Recovery Manager ........................................................................................... 73

What you need to know before you get started ............................................................. 73
Using the HP Recovery partition (select products only) ................................................. 74
Using HP Recovery media to recover .............................................................................. 74
Changing the computer boot order ................................................................................  75
Removing the HP Recovery partition (select products only) .........................................  76

viii

Summary of Contents for Omen series

































































































Reviews:

No comments