manualshive.com logo in svg

HP Omen series, Maintenance And Service Manual, Page: 49 / 96

Share
Download
HP Omen series Maintenance And Service Manual Download Page 49

Hard drive

Description

Spare part number

Hard drive

 

1 TB 7200 RPM SATA RAW 9.5 mm

766644-005

2 TB 5400 RPM SATA RAW 7 mm, not available for products with AMD Radeon hybrid graphics

912487-855

Hard drive cable

858969-001

Hard drive brackets

913937-001

IMPORTANT:

Make special note of each screw and screw lock size and location during removal 

and replacement.

Before removing the hard drive, follow these steps:

1.

Shut down the computer.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the base enclosure (see 

Base enclosure on page 32

).

5.

Disconnect the battery (see 

Battery on page 34

).

Remove the hard drive:

1.

Disconnect the hard drive cable (1), slide the hard drive horizontally (2), and then loosen the side 
brackets (3).

2.

Lift the right side of the hard drive (4), and then remove the hard drive (5).

Component replacement procedures

39

Summary of Contents for Omen series

































































































Reviews:

No comments