manualshive.com logo in svg

HP Omen series, Maintenance And Service Manual, Page: 70 / 96

Share
Download
HP Omen series Maintenance And Service Manual Download Page 70

Display panel

Description

Spare part number

Bezel

 

For products with an HD camera

856725-001

For products with a 3D camera

856726-001

Display panel

 

15.6" FHD AG UWVA 220 eDP, Slim

752920-014

15.6" UHD AG UWVA 300 eDPU Slim

842484-004

15.6" 1920x1080 AG UWVA 220 eDPU Slim (limited to China localization only)

915613-001

Hinge assembly 

856741-001

Hinge cap assembly

859737-001

Display cable 

FHD display cable for products with an HD camera

856733-001

FHD display cable for products with a 3D camera

856734-001

UHD display cable for products with an HD camera

856735-001

UHD display cable for products with a 3D camera

856736-001

WLAN antenna

856923-001

Back cover

 

In Hybrid Green finish, with antenna

905115-001

In Shadow Mesh finish, with antenna, for products with HD camera

856715-001

In Shadow Mesh finish, with antenna, for products with 3D camera

856718-001

IMPORTANT:

Make special note of each screw and screw lock size and location during removal 

and replacement.

Before removing the display assembly, follow these steps:

1.

Shut down the computer.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the base enclosure (see 

Base enclosure on page 32

).

5.

Disconnect the battery (see 

Battery on page 34

), and then remove the following components:

▲

Display assembly (see 

Display assembly on page 37

).

Remove the display panel:

1.

Use a thin plastic tool to disengage the bezel starting on the top edge (1). Continue on the left and right 
edges (2) and then bottom edge (3), and then lift the display bezel (4) to remove it.

60

Chapter 5   Removal and replacement procedures for authorized service provider parts

Summary of Contents for Omen series

































































































Reviews:

No comments