manualshive.com logo in svg

HP Omen series, Maintenance And Service Manual, Page: 51 / 96

Share
Download
HP Omen series Maintenance And Service Manual Download Page 51

SSD (M.2)

Description

Spare part number

Generic SSD 128 GB 2280 M2 SATA-3 Value TL

827560-027

Generic SSD 256 GB 2280 M2 PCIe 3x4SS NVMe TLC TL

847109-008

Generic SSD 512 GB 2280 M2 PCIe3x4SS NVMe TLC TL, not for products with AMD Radeon hybrid 
graphics

847110-007

Before removing the SSD, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the base enclosure (see 

Base enclosure on page 32

).

5.

Disconnect the battery (see 

Battery on page 34

).

Remove the SSD:

1.

Remove the Phillips M2.0 x 2.5 screw (1) that secures the SSD to the system board.

2.

Remove the SSD (2) by pulling the drive away from the slot at an angle.

Reverse this procedure to install the SSD.

Component replacement procedures

41

Summary of Contents for Omen series

































































































Reviews:

No comments