manualshive.com logo in svg

HP Omen series, Maintenance And Service Manual, Page: 75 / 96

Share
Download
HP Omen series Maintenance And Service Manual Download Page 75

Camera

Description

Spare part number

Camera

 

Intel RealSense 3D camera 1080p

781624-005

HP Wide Vision HD camera 720p

846006-003

3D camera cable

859445-001

Microphone board, for products with a 3D camera

857471-001

IMPORTANT:

Make special note of each screw and screw lock size and location during removal 

and replacement.

Before removing the camera, follow these steps:

1.

Shut down the computer.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the base enclosure (see 

Base enclosure on page 32

).

5.

Disconnect the battery (see 

Battery on page 34

), and then remove the following components:

a.

Display assembly (see 

Display assembly on page 37

).

b.

Display bezel (see 

Display panel on page 60

).

Remove the camera:

1.

If it is necessary to replace to remove the camera board, lift the camera board (1), and then disconnect 
the camera cable (2) from the camera board.

Component replacement procedures

65

Summary of Contents for Omen series

































































































Reviews:

No comments