manualshive.com logo in svg

HP Omen series, Maintenance And Service Manual, Page: 44 / 96

Share
Download
HP Omen series Maintenance And Service Manual Download Page 44

Battery

Description

Spare part number

3 cell prismatic battery - 61.5 Whr (5360 mAh), for use with products with Intel 6th generation 
processors or Intel 7th generation processors with AMD Radeon RX 460 R16MG1-70

849910-850

4 cell polymer battery - 63.3 Whr (4175 mAh), for use with products with Intel 7th generation 
processors, not supported by AMD Radeon RX 460 R16MG1-70

905277-855

Battery cable

858968-001

Remove the battery:

WARNING!

To reduce potential safety issues, use only the user-replaceable battery provided with the 

computer, a replacement battery provided by HP, or a compatible battery purchased from HP.

CAUTION:

Removing a user-replaceable battery that is the sole power source for the computer can cause 

loss of information. To prevent loss of information, save your work or shut down the computer through 
Windows before removing the battery.

Before removing the battery, follow these steps:

1.

Shut down the computer.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the base enclosure (see 

Base enclosure on page 32

).

Remove the battery:

1.

Disconnect the battery cable from the battery.

34

Chapter 5   Removal and replacement procedures for authorized service provider parts

Summary of Contents for Omen series

































































































Reviews:

No comments