HP OMEN 15-ce100 Page 82 Maintenance And Service Manual Download

Page: 82 / 108

Display panel

NOTE:

The display panel spare part kit does not include the display cable or display panel brackets.

Description

Spare part number

15.6 in, WLED, FHD, UWVA, eDP display panel

752920-019

Display and webcam cable

929451-001

Display panel bracket, left

929461-001

Display panel bracket, right

929460-001

IMPORTANT:

Make special note of each screw and screw lock size and location during removal

and replacement

Before removing the display panel, follow these steps:

Shut down the computer.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 36

), and then remove the following components:

Hinge covers (see

Hinge covers on page 45

System support brackets (see

System support brackets on page 46

Heat sink (see

Heat sink on page 53

System board (see

System board on page 58

Display assembly (see

Display assembly on page 61

Display bezel (see

Display bezel on page 66

Remove the display panel:

Remove the six Phillips PM1.9×3.5 screws (1) that secure the brackets to the display assembly.

Chapter 6 Removal and replacement procedures for authorized service provider parts

Summary of Contents for OMEN 15-ce100













































































































Search results

Summary of Contents for OMEN 15-ce100

Reviews:

Related manuals for OMEN 15-ce100

Brands by name

Popular brands

HP OMEN 15-ce100, Maintenance And Service Manual

Search results

Summary of Contents for OMEN 15-ce100

Reviews:

Related manuals for OMEN 15-ce100

Brands by name

Popular brands