HP OMEN 15-ce100 Maintenance And Service Manual Download

Page: 71 / 108

Display assembly

IMPORTANT:

Make special note of each screw and screw lock size and location during removal

and replacement

Before removing the display assembly, follow these steps:

Shut down the computer.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 36

), and then remove the following components:

Hinge covers (see

Hinge covers on page 45

System support brackets (see

System support brackets on page 46

Fans (see

Fans on page 49

Heat sink (see

Heat sink on page 53

System board (see

System board on page 58

Remove the display assembly:

Disconnect the display panel cable from the system board (1).

Disconnect the WLAN antenna cable from the system board (2).

Release the WLAN antenna cable from the clips securing it to the computer (3).

Open the computer with the bottom facing up (1).

Remove the four Phillips PM2.5×5.7 screws (2) securing the display assembly to the computer.

Component replacement procedures

Summary of Contents for OMEN 15-ce100













































































































Search results

Summary of Contents for OMEN 15-ce100

Reviews:

Related manuals for OMEN 15-ce100

Brands by name

Popular brands

HP OMEN 15-ce100, Maintenance And Service Manual

Search results

Summary of Contents for OMEN 15-ce100

Reviews:

Related manuals for OMEN 15-ce100

Brands by name

Popular brands