manualshive.com logo in svg

HP ntegrity iLO 2 MP, Operation Manual

The HP Integrity iLO 2 MP is a powerful management processor designed to optimize system performance. With its intuitive interface and easy-to-follow operation manual, users can effortlessly navigate and control various features. Download the manual for free from manualshive.com and unlock the full potential of this exceptional product.

Share
Download
background image

NOTE:

The

BL c-Class

tab is available only on HP Integrity server blades.

Table 6-22

lists the fields, buttons, and descriptions.

Table 6-22 Serial Page Description

Description

Fields and Buttons

This option enables you to set the baud rate. Input and output data rates are the same.

Bit Rate in Bits per Second

Flow control can be through hardware or software. Hardware uses RTS/CTS; software
uses Xon or Xoff.

Flow Control

Submits the information.

Submit

Cancels the action.

Cancel

Login Options Page

The Login Option page (

Figure 6-25

) enables you to modify the security options of the iLO 2 MP.

You must have iLO configuration access right to use this feature.

Figure 6-25 Login Options Page

NOTE:

The

BL c-Class

tab is available only on HP Integrity server blades.

Table 6-23

lists the fields, buttons, and descriptions.

Table 6-23 Login Options Page Description

Description

Fields and Buttons

The timeout value in minutes is effective on all ports, including local ports.

Login Timeout in Minutes

This sets a limit on the number of password faults allowed when logging in to the iLO
2 MP. The default number of password faults allowed is three.

Password Faults Allowed

Web GUI

115

Summary of Contents for ntegrity iLO 2 MP








































































































































































































Reviews:

No comments

Related manuals for ntegrity iLO 2 MP

IBM Power 570 Technical Overview And Introduction preview
Power 570
Brand: IBM Pages: 142
IBM H SERIES RS/6000 Installation And Service Manual preview
H SERIES RS/6000
Brand: IBM Pages: 424
LOOQS MB202 User Manual preview
MB202
Brand: LOOQS Pages: 69
Silex technology DS-510 Package Contents preview
DS-510
Brand: Silex technology Pages: 2
Amulet Hotkey DXMP 5000 Quick Start Manual preview
DXMP 5000
Brand: Amulet Hotkey Pages: 2
Webster MultiPort/LT User'S Reference Manual preview
MultiPort/LT
Brand: Webster Pages: 114
3Com CS/3000 Installation Manual preview
CS/3000
Brand: 3Com Pages: 122
Elastix NLX-miniUCS Appliance Quick Start Manual preview
NLX-miniUCS Appliance
Brand: Elastix Pages: 5
GIGA-BYTE TECHNOLOGY G591-HS0 User Manual preview
G591-HS0
Brand: GIGA-BYTE TECHNOLOGY Pages: 113
Gateway 8300 User Manual preview
8300
Brand: Gateway Pages: 48
Oracle StorageTek LTO User Manual preview
StorageTek LTO
Brand: Oracle Pages: 34
ClearCube M2010S User Manual preview
M2010S
Brand: ClearCube Pages: 142
Digitus DN-13020 User Manual preview
DN-13020
Brand: Digitus Pages: 37
3Svision S20712ch User Manual preview
S20712ch
Brand: 3Svision Pages: 135
Gigabyte LGA3647 Service Manual preview
LGA3647
Brand: Gigabyte Pages: 107
NETGEAR ReadyNAS RAIDiator 5.3 Installation Manual preview
ReadyNAS RAIDiator 5.3
Brand: NETGEAR Pages: 2
Cambridge Audio 640Hazur Network Manual preview
640Hazur
Brand: Cambridge Audio Pages: 15
DCB EST-9600 Manual preview
EST-9600
Brand: DCB Pages: 27

Brands by name

Popular brands

Load more brands