HP ntegrity iLO 2 MP, Operation Manual

Page: 141 / 199

set Sets a property to a specific value.
Target: map1/settings1/dnssettings1
The
dnssettings1
target contains iLO 2 MP DNS settings.
Table 6-48 shows
dnssettings1
target properties.
Table 6-48 dnssettings1 Properties
Access and Values Description Property Name
Read/write
This is an array property.
The value of each element of this
property must be expressed in
dotted decimal notation. The
elements of the property are
separated by commas
(DNSServerAddressess=192.0.2.1,
192.0.2.2, 192.0.2.3 means that the
IP addresses of the primary,
secondary and tertiary DNS servers
are set to 192.0.2.1, 192.0.2.2,
192.0.2.3 respectively).
Contains the IP addresses of the
primary, secondary, and tertiary
DNS servers. DNSServerAddress
Read/write iLO 2 MP domain name. DomainName
Read/write.
The following are valid values:
Yes: register with DDNS server.
No: do not register with DDNS
server.
Indicates whether iLO 2 MP
registers with the DDNS server. RegisterThisConnections Address
Read/write. iLO 2 MP host name. RequestedHostName
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
set Sets a property to a specific value.
SM CLP Network Command Examples
The following examples list specific network commands.
Determine iLO 2 MP’s MAC Address
</>hpiLO-> show -d properties=macaddress /map1/enetport1/lanendpt1
or
</>hpiLO-> show -d properties=permanentaddress /map1/enetport1/
Determine current IP Address
</>hpiLO-> show -d properties=ipv4address /map1/enetport1/lanendpt1/ipendpt1
Determine Subnet Mask
</>hpiLO-> show -d properties=subnetmask /map1/enetport1/lanendpt1/ipendpt1
Set IP Address and Subnet Mask
To modify a Static IP Address and Subnet Mask, set IPv4Address and SubnetMask properties
of the ipendpt1 target:
</>hpiLO-> set /map1/enetport1/lanendpt1/ipendpt1
ipv4address=192.0.2.1 subnetmask=192.0.2.1
SMASH Server Management Command Line Protocol 141