HP ntegrity iLO 2 MP, Operation Manual

Page: 173 / 199

Certificate Services
The following sections provide instructions for installing Certificate Services, verifying directory
services, and configuring automatic certificate requests.
Installing Certificate Services
To install Certificate Services, follow these steps:
1. Select Start>Settings>Control Panel .
2. Double-click Add/Remove Programs .
3. Click Add/Remove Windows Components to start the Windows Components wizard.
4. Select Certificate Services and click Next.
5. At the warning that the server cannot be renamed, click OK . The Enterprise root CA option
is selected because there is no CA registered in the Active Directory.
6. Enter the information appropriate for your site and organization. Accept the default time
period of two years in the Valid for field and click
Next .
7. Accept the default locations of the certificate database and the database log. Click Next.
8. Browse to the
c: I386
folder when prompted for the Windows 2000 Advanced Server CD.
9. Click Finish to close the wizard.
Verifying Directory Services
Because the iLO 2 MP communicates with Active Directory using SSL, you must create a certificate
or install Certificate Services. Install an enterprise CA because you are issuing certificates to
objects within your organizational domain.
To verify that certificate services is installed, select Start>Programs>Administrative
Tools>Certification Authority . If Certificate Services is not installed, an error message appears.
Configuring an Automatic Certificate Request
To request that a certificate be issued to the server:
1. Select Start>Run , and enter
mmc
.
2. Click
Add
.
3. Select
Group Policy
, and click
Add
to add the snap-in to the MMC.
4. Click
Browse
, and select the
Default Domain Policy
object. Click
OK
.
5. Select
Finish>Close>OK
.
6.
Expand Computer Configuration>Windows Settings>Security Settings>Public Key
Policies
.
7. Right-click
Automatic Certificate Requests Settings
, and select
New>Automatic
Certificate Request
.
8. When the Automatic Certificate Request Setup wizard starts, click
Next
.
9. Select the
Domain Controller
template, and click
Next
.
10. Select the certificate authority listed. (the same CA defined during the Certificate Services
installation). Click Next .
11. Click Finish to close the wizard.
Directory-Enabled Remote Management
This section is for administrators who are familiar with directory services and with the iLO 2
MP product. To familiarize yourself with the product and services, see
“Directory Services”
(page 147) . Be sure you understand the examples and are comfortable with setting up the product.
Certificate Services 173