manualshive.com logo in svg

HP ntegrity iLO 2 MP, Operation Manual

The HP Integrity iLO 2 MP is a powerful management processor designed to optimize system performance. With its intuitive interface and easy-to-follow operation manual, users can effortlessly navigate and control various features. Download the manual for free from manualshive.com and unlock the full potential of this exceptional product.

Share
Download
background image

•

Modify the MP subnet mask.

MP:CM> LC -s 192.0.2.1

•

Modify the MP gateway address.

MP:CM> LC -g 192.0.2.1

•

Set the link state to autonegotiate.

MP:CM> LC –link auto

•

Set the link state to 10 BaseT.

MP:CM> LC –link t

•

Set the remote console serial port address.

MP:CM> LC –web 2023

•

Set the SSH console port address.

MP:CM> LC –ssh 22

Configuring DNS

To use the DNS command to display and modify the DNS configuration, follow these steps:

1.

From the

MP Main Menu

, enter command mode.

2.

At the

MP:CM>

prompt, enter

DNS

. The screen appears

current DNS

data.

3.

When prompted, enter

A

to select all parameters. The screen displays the current DHCP for

DNS servers status.

4.

When prompted, enter

Enabled

or

Disabled

. The screen displays the current DHCP for

DNS domain name status.

5.

When prompted, enter

Enabled

or

Disabled

. The screen displays the current register

with DDNS server value.

6.

When prompted, enter

Yes

or

No

. The screen displays the current DNS domain name.

7.

When prompted, enter a new value. The screen displays the primary DNS server IP address.

8.

When prompted, enter a new value. The screen displays the optional secondary DNS server
IP address.

9.

When prompted, enter a new value. The screen displays the optional tertiary DNS server
IP address.

10. When prompted, enter a new value.

The DNS configuration is updated as follows:

New DNS Configuration (* modified values):

   * S - DHCP for DNS Servers      : Disabled
   * D - DHCP for DNS Domain Name  : Disabled
     R - Register with DDNS Server : Yes
   * N - DNS Domain Name           : mpdns.company.com
   * 1 - Primary DNS Server IP     : 192.0.2.1
     2 - Secondary DNS Server IP   : 
     3 - Tertiary DNS Server IP    : 

Enter parameter(s) to revise, Y to confirm, or [Q] to Quit: Y

-> DNS Configuration has been updated

[mpserver] MP:CM>

54

Configuring DHCP, DNS, LDAP, and LDAP Lite

Summary of Contents for ntegrity iLO 2 MP








































































































































































































Reviews:

No comments

Related manuals for ntegrity iLO 2 MP

IBM BladeCenter HS23 User Manual preview
BladeCenter HS23
Brand: IBM Pages: 30
IBM System x3950 X6 Product Manual preview
System x3950 X6
Brand: IBM Pages: 53
NEC Express5800/T110g-E Quick Start Manual preview
Express5800/T110g-E
Brand: NEC Pages: 2
HPE ProLiant DL580 Gen10 User Manual preview
ProLiant DL580 Gen10
Brand: HPE Pages: 158
Supero SUPERSERVER 6015C-M3 User Manual preview
SUPERSERVER 6015C-M3
Brand: Supero Pages: 118
TAPKO SIMip Operating Instructions preview
SIMip
Brand: TAPKO Pages: 2
Toshiba RS-TX60 Specification Sheet preview
RS-TX60
Brand: Toshiba Pages: 2
Toshiba BMS-LSV6E Installation Manual preview
BMS-LSV6E
Brand: Toshiba Pages: 8
Toshiba BMS-LSV6UL Installation Manual preview
BMS-LSV6UL
Brand: Toshiba Pages: 12
Toshiba BMS-LSV4E Installation Manual preview
BMS-LSV4E
Brand: Toshiba Pages: 8
Toshiba C1 Installation Manual preview
C1
Brand: Toshiba Pages: 16
Toshiba IPedge EP Server Product Bulletin preview
IPedge EP Server
Brand: Toshiba Pages: 19
Toshiba SD-H400 - Combination Progressive-Scan DVD Player Service Manual preview
SD-H400 - Combination Progressive-Scan DVD Player
Brand: Toshiba Pages: 53
Toshiba MAGNIA 510D User Manual preview
MAGNIA 510D
Brand: Toshiba Pages: 185
Toshiba Digital Media Server Viewer'S Manual preview
Digital Media Server
Brand: Toshiba Pages: 204
Toshiba Magnia 550D User Manual preview
Magnia 550D
Brand: Toshiba Pages: 241
Toshiba Magnia Z300 User Manual preview
Magnia Z300
Brand: Toshiba Pages: 270
Toshiba Magnia Z310 User Manual preview
Magnia Z310
Brand: Toshiba Pages: 418

Brands by name

Popular brands

Load more brands