HP NonStop SQL/MP Programming Manual Download

Page: 99 / 331

SQL/MP System Procedures

HP NonStop SQL/MP Programming Manual for C—429847-008

5-5

SQLCADISPLAY

The SQLMSG file contains text in English. You can specify a different SQL
message file with the =_SQL_MSG_

node

DEFINE. For more information, see

SQL Message File

on page 5-2.

errors

controls the display of error messages:

The default is Y.

warnings

controls the display of warning messages:

The default is Y.

statistics

controls the display of statistics:

The default is Y.

caller_error_loc

controls the display of the program name and line number of the SQL statement
that received the error:

The default is Y.

Y Display

all

errors.

Display only the first error.

Display all errors but suppress this prefix:

ERROR from

subsystem

[

]

Y Display

all

warning messages.

Display all warning messages.

Display all warnings but suppress this prefix:

WARNING from

subsystem

[

]

Display row and cost statistics if the value returned to the SQLCA in the
ROW or COST field is greater than or equal to 0.

Do not display statistics.

Display row statistics only.

Display cost statistics only.

Y Display

the

program name and line number.

N Suppress

the

display.

Summary of Contents for NonStop SQL/MP












































































































































































































































































































































Search results

Summary of Contents for NonStop SQL/MP

Reviews:

Related manuals for NonStop SQL/MP

Brands by name

Popular brands

HP NonStop SQL/MP, Programming Manual

Search results

Summary of Contents for NonStop SQL/MP

Reviews:

Related manuals for NonStop SQL/MP

Brands by name

Popular brands