manualshive.com logo in svg

HP NonStop SQL/MP, Programming Manual

Share
Download
HP NonStop SQL/MP Programming Manual Download Page 202

Dynamic SQL Operations

HP NonStop SQL/MP Programming Manual for C—429847-008

10-4

SQLDA Structure, Names Buffer, and Collation

Buffer

names-buffer

is the SQLDA names buffer; it must follow the conventions for a C identifier. 

max-name-length

 

is the maximum number of bytes you expect in a parameter name or column name 
to be returned in a DESCRIBE or DESCRIBE INPUT statement. A qualified column 
name can be from 1 to 30 bytes long and is in this format: 

table-name.column-name

A parameter name is an SQL identifier with a maximum of 30 bytes. 

release-option 

specifies the version of the SQLDA structure generated by the C compiler. 
RELEASE1 specifies SQL/MP version 1, and RELEASE2 specifies SQL/MP 
version 2. If 

release-option

 specifies a version other than the default for the 

system, the C compiler appends _R1 or _R2 to the SQLDA names and identifiers. 

CPRULES

is a required keyword if you specify a collation buffer. 

collation-buffer

is a host variable specifying the name of the collation buffer. The 
COLLATIONS INTO clause of the DESCRIBE statement allows you to return 
collations to 

collation-buffer

. 

max-collation-size 

is the maximum number of bytes you expect for any one collation.

Note.

Although version 300 (and later) C compilers allow the RELEASE1 and RELEASE2 

options, HP might not support these options in a future RVU. If you are using a 
version 300 (or later) C compiler to generate version 1 or version 2 data structures, 
replace the RELEASE1 or RELEASE2 option with the VERSION 1 or VERSION 2 option 
of the INCLUDE STRUCTURES directive. 

Summary of Contents for NonStop SQL/MP












































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands