manualshive.com logo in svg

HP NonStop SQL/MP, Programming Manual

Share
Download
HP NonStop SQL/MP Programming Manual Download Page 287

Character Processing Rules (CPRL) Procedures

HP NonStop SQL/MP Programming Manual for C—429847-008

11-23

CPRL_UPSHIFT_

filename

is the Guardian file name in external format containing the collation object. The file 
code for 

filename 

must be 199. 

filenamelength

is the length in bytes of 

filename

.

cprladdr

is the address of the collation object if 0 (zero) is returned. Otherwise, 

cprladdr 

is set to an invalid address. 

CPRL_UPSHIFT_ 

The CPRL_UPSHIFT_ procedure upshifts a character string according to the upshift 
rules in the specified SQL collation or collation object. 

The CPRL_UPSHIFT_ procedure returns these values: 

inputstring

is an array containing the data to be upshifted.

inputstringlength

is the number of bytes in 

inputstring

 to be upshifted.

shiftedstring

is an array in which CPRL_UPSHIFT_ returns the upshifted string. 

The values for 

inputstring

 and 

shiftedstring

 can be equal, but other 

values can cause unpredictable results. 

#include <cextdecs(CPRL_UPSHIFT_)> 

short CPRL_UPSHIFT_ ( 
                  char *

inputstring             

/* i */

                 ,short 

inputstringlength

       /* i */

                 ,char *

shiftedstring           

/* o */

                 ,short 

shiftedstringmaxlength  

/* i */

                 ,short *

shiftedstringlength

    /* o */

                 ,long 

cprladdr 

);              /* i */

Code Description

  0

The operation was successful. 

–2

The SQL collation or collation object is invalid. 

–4

The version of the SQL collation or collation object is not supported. 

–20

The user-specified buffer is not large enough to receive the returned string. 

Summary of Contents for NonStop SQL/MP












































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands