HP NonStop SQL/MP, Programming Manual

Page: 217 / 331

Dynamic SQL Operations
HP NonStop SQL/MP Programming Manual for C—429847-008
10-19
Dynamic Allocation of Memory
provide names for the SQLDA and names buffer as shown:
EXEC SQL INCLUDE SQLDA (dummy_da, 1, dummy_namesbuf, 1);
The INCLUDE directive generates the structure templates
sqlda_type
and
sqlvar_type
, which you can later use to allocate the memory. You might set up
the pointers that will eventually point to that memory. For example:
typedef struct SQLDA_TYPE *sqldaptr;
sqldaptr input_sqlda_ptr, output_sqlda_ptr;
When the memory is allocated,
input_sqlda_ptr
points to the memory for the
input SQLDA, and
output_sqlda_ptr
points to the memory for the output
SQLDA. To access the SQLDA and names buffer, declare pointers and then pass
the pointers to a function that allocates the memory as follows:
EXEC SQL BEGIN DECLARE SECTION;
typedef struct SQLDA_TYPE *sqldaptr;
sqldaptr input_sqlda_ptr, output_sqlda_ptr;
typedef char (*arrayptr) [1000];
arrayptr input_namesbuf_ptr, output_namesbuf_ptr;
EXEC SQL END DECLARE SECTION;
To give the DESCRIBE INPUT and DESCRIBE statements a size to use before the
memory is actually allocated, you must declare the names buffer to be an
arbitrarily large size (this example uses 1000). Estimate a number that is greater
than any possible size your names buffer could be. Otherwise, DESCRIBE INPUT
and DESCRIBE might stop describing parameters or variables too soon.
3. Declare an SQLSA structure using the INCLUDE SQLSA directive:
EXEC SQL INCLUDE SQLSA;
4. Dynamically compile the SQL statement (
stmt1
) entered by the user using the
PREPARE statement as shown in this example:
#define MAX_QUERY_SIZE 512
EXEC SQL BEGIN DECLARE SECTION;
char statement_buffer[MAX_QUER 1];
...
EXEC SQL END DECLARE SECTION;
...
printf("\nEnter a new SQL statement:\n");
/* Pass statement_buffer to a function that reads */
/* and parses the input (code is in sample program) */
...
EXEC SQL PREPARE stmt1 FROM :statement_buffer;
5. Use the information in the SQLSA structure to determine the number of input
parameters and output variables in the statement.
6. Allocate space for the required number of SQLDA data structures to describe the
parameters and output variables using the
malloc
function.
7. Allocate space for the values input to the program or output from the database,
again using the
malloc
function.