manualshive.com logo in svg

HP NonStop SQL/MP, Programming Manual

The HP NonStop SQL/MP Programming Manual is an essential resource for developers working with this powerful database management system. This comprehensive manual provides detailed instructions and guidelines for programming with SQL/MP. Download this invaluable resource for free from our website manualshive.com.

Share
Download
background image

Character Processing Rules (CPRL) Procedures

HP NonStop SQL/MP Programming Manual for C—429847-008

11-15

CPRL_GETFIRST_

cprladdr

is a pointer to the SQL collation or collation object.

CPRL_GETFIRST_ 

The CPRL_GETFIRST_ procedure finds the first string of a specified length according 
to an SQL collation or collation object. 

This procedure replaces the practice of using a string of hexadecimal zeros to 
generate the first string of a specified length, which does not work correctly for 
nonbinary collating sequences.

The CPRL_GETFIRST_ procedure returns these values: 

firststring

is an array in which CPRL_GETFIRST_ returns the first string.

firststringmaxlength

is the maximum length of 

firststring

.

firststringlength

specifies the number of bytes of 

firststring 

that were scanned. (If 

CPRL_GETFIRST_ is successful, 

firststringmaxlength 

and 

firststringlength 

are equal.) 

cprladdr

is a pointer to the SQL collation or collation object.

#include <cextdecs(CPRL_GETFIRST_)>

short CPRL_GETFIRST_ (
                      char *

firststring           

/* o */ 

                     ,short 

firststringmaxlength  

/* i */ 

                     ,short *

firststringlength

    /* o */ 

                     ,long 

cprladdr 

);            /* i */ 

Code Description

  0

The operation was successful. 

–2

The SQL collation or collation object is invalid. 

–4

The version of the SQL collation or collation object is not supported. 

Summary of Contents for NonStop SQL/MP












































































































































































































































































































































Reviews:

No comments

Related manuals for NonStop SQL/MP

Waves API 550 User Manual preview
API 550
Brand: Waves Pages: 20
MACROMEDIA BREEZE-MANAGING EXTERNAL BREEZE REPORTS Manual preview
BREEZE-MANAGING EXTERNAL BREEZE REPORTS
Brand: MACROMEDIA Pages: 18
Avaya C460 SMON Quick Start Manual preview
C460 SMON
Brand: Avaya Pages: 20
Red Hat CERTIFICATE SYSTEM 8 - AGENTS GUIDE Agents Manual preview
CERTIFICATE SYSTEM 8 - AGENTS GUIDE
Brand: Red Hat Pages: 146
Red Hat CLUSTER SUITE 4.7 DM MULTIPATH Configuration And Administration Manual preview
CLUSTER SUITE 4.7 DM MULTIPATH
Brand: Red Hat Pages: 38
3Com 3C16120 - SuperStack 3 Server Load Balancer User Manual preview
3C16120 - SuperStack 3 Server Load Balancer
Brand: 3Com Pages: 99
Globalsat GPS Information User Manual preview
GPS Information
Brand: Globalsat Pages: 7
GRASS VALLEY MEDIAEDGE-SVS4 Datasheet preview
MEDIAEDGE-SVS4
Brand: GRASS VALLEY Pages: 2
GRASS VALLEY EDIUS 6 Application Note preview
EDIUS 6
Brand: GRASS VALLEY Pages: 24
GRASS VALLEY AURORA INGEST - S AND UPGRADE INSTRUCTIONS V7.1 Upgrade Instructions preview
AURORA INGEST - S AND UPGRADE INSTRUCTIONS V7.1
Brand: GRASS VALLEY Pages: 66
Cabletron Systems 7C03 MMAC SmartSWITCH User Manual preview
7C03 MMAC SmartSWITCH
Brand: Cabletron Systems Pages: 150
IBM VIAVOICE 10-STANDARD EDITION User Manual preview
VIAVOICE 10-STANDARD EDITION
Brand: IBM Pages: 124
Magellan eXplorist 210 Quick Reference Manual preview
eXplorist 210
Brand: Magellan Pages: 14
UNIBLUE POWERSUITE 2010 - V1 Product Manual preview
POWERSUITE 2010 - V1
Brand: UNIBLUE Pages: 13
Juniper NETWORK AND SECURITY MANAGER Manual preview
NETWORK AND SECURITY MANAGER
Brand: Juniper Pages: 340
Autodesk CAICE VISUAL SURVEY 10 - QUESTIONS AND ANSWERS Manual preview
CAICE VISUAL SURVEY 10 - QUESTIONS AND ANSWERS
Brand: Autodesk Pages: 5
Novell ZENWORKS PATCH MANAGEMENT 6.3 - S Release Note preview
ZENWORKS PATCH MANAGEMENT 6.3 - S
Brand: Novell Pages: 18
Novell ZENworks Endpoint Security Client 4.0 Manual preview
ZENworks Endpoint Security Client 4.0
Brand: Novell Pages: 24

Brands by name

Popular brands

Load more brands