manualshive.com logo in svg

HP NonStop SQL/MP, Programming Manual

The HP NonStop SQL/MP Programming Manual is an essential resource for developers working with this powerful database management system. This comprehensive manual provides detailed instructions and guidelines for programming with SQL/MP. Download this invaluable resource for free from our website manualshive.com.

Share
Download
background image

Error and Status Reporting

HP NonStop SQL/MP Programming Manual for C—429847-008

9-2

Using the INCLUDE STRUCTURES Directive

Use this syntax for the INCLUDE STRUCTURES directive: 

ALL VERSION

specifies the same version for all three SQL structures (SQLCA, SQLSA, and 
SQLDA). 

{ SQLCA | SQLSA | SQLDA } VERSION

specify the SQLCA, SQLSA, or SQLDA structure, respectively.

version

specifies the version number of the generated data structures; 

version 

can be 1, 

2, 300, or 340 (or later). Version 330 applies only to the SQLSA structure. 

SQLSA VERSION CURRENT

specifies that a subsequent INCLUDE SQLSA directive should generate both a 
version 300 and version 330 SQLSA structure. This option supports run-time 
SQLSA versioning, which allows a program to use an SQLSA structure that has 
the same version as the current SQL/MP software for the system. 

The SQLSA VERSION CURRENT option has these requirements: 

It applies only to the SQLSA structure and not to the SQLCA or SQLDA 
structure. 

The SQL/MP software version must be 340 or later. 

You must compile your program using the NMC compiler on TNS/R systems or 
the C compiler with the CPPSOURCE option of the SQL pragma on TNS 
systems. For more information, see the 

C/C++ Programmer’s Guide

. 

You must include the SQLGETSYSTEMVERSION procedure declaration from 
the 

cextdecs

 header file in your program, because the option generates a 

call to this procedure. For example: 

#include <cextdecs (SQLGETSYSTEMVERSION, ...)>

INCLUDE STRUCTURES { structure-spec } 

  structure-spec is:  
             
      { [ ALL ] VERSION version                   }

      { { SQLCA | SQLSA | SQLDA } VERSION version }...

      {   SQLSA VERSION CURRENT                   }

      { { SQLCA | SQLSA } [ EXTERNAL ]            }

Summary of Contents for NonStop SQL/MP












































































































































































































































































































































Reviews:

No comments

Related manuals for NonStop SQL/MP

F-SECURE ONLINE BACKUP - HELP Manual preview
ONLINE BACKUP - HELP
Brand: F-SECURE Pages: 20
AVIRA ANTIVIR VIRUS SCAN ADAPTER FOR SAP SOLUTIONS User Manual preview
ANTIVIR VIRUS SCAN ADAPTER FOR SAP SOLUTIONS
Brand: AVIRA Pages: 67
Euphonix MixView 3.0 Overview preview
MixView 3.0
Brand: Euphonix Pages: 8
ACRONIS SNAP DEPLOY 2.0 - User Manual preview
SNAP DEPLOY 2.0 -
Brand: ACRONIS Pages: 68
Mitsubishi Gpredict 1.2 User Manual preview
Gpredict 1.2
Brand: Mitsubishi Pages: 64
Microtek ScanWizard Pro Reference Manual preview
ScanWizard Pro
Brand: Microtek Pages: 177
IBM Tivoli ADSTAR User Manual preview
Tivoli ADSTAR
Brand: IBM Pages: 62
Sanyo VA-SW8000 Instruction Manual preview
VA-SW8000
Brand: Sanyo Pages: 132
Broadcom Bluetooth for Microsoft Windows User Manual preview
Bluetooth for Microsoft Windows
Brand: Broadcom Pages: 30
Cycos Cycos ERGO mrs 5.0 Administrator'S Manual preview
Cycos ERGO mrs 5.0
Brand: Cycos Pages: 46
DeLorme Earthmate GPS BT-20 Quick Start Manual preview
Earthmate GPS BT-20
Brand: DeLorme Pages: 9
LEI Extras MAPCREATE 7 - ADDENDUM Quick Start Manual preview
MAPCREATE 7 - ADDENDUM
Brand: LEI Extras Pages: 16
Oracle Database Advanced Security 10g Release 1 Administrator'S Manual preview
Database Advanced Security 10g Release 1
Brand: Oracle Pages: 518
Qlogic Fast Fabric User Manual preview
Fast Fabric
Brand: Qlogic Pages: 174
MACROMEDIA COLDFUSION STUDIO 5-USING COLDFUSION 5... Use Manual preview
COLDFUSION STUDIO 5-USING COLDFUSION 5...
Brand: MACROMEDIA Pages: 328
CAKEWALK PRO AUDIO User Manual preview
PRO AUDIO
Brand: CAKEWALK Pages: 604
IBM NETCOOL 4.3-X User Manual preview
NETCOOL 4.3-X
Brand: IBM Pages: 220
Oki LP441s Manual preview
LP441s
Brand: Oki Pages: 34

Brands by name

Popular brands

Load more brands