background image

Power connector cable

Description

Spare part number

Power connector cable

813505-001

Before removing the power connector cable, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 24

).

5.

Remove the bottom cover (see 

Bottom cover on page 25

).

6.

Remove the display (see 

Display assembly on page 48

).

To remove the power connector cable:

1.

Disconnect the cable from the system board (1).

2.

Lift the tape that secures the connector to the computer (2).

3.

Remove the cable from the clips around the fan (3), and then lift the power connector cable from the 
computer (4).

Reverse this procedure to install the power connector cable.

Component replacement procedures

55

Summary of Contents for mt245



































































































Reviews: