HP mt245 Maintenance And Service Manual Download Page 15

Page: 15 / 98

Component

Description

WARNING!

To reduce the risk of personal injury, adjust the

volume before putting on headphones, earbuds, or a headset.
For additional safety information, see the Regulatory, Safety,
and Environmental Notices. To access the user guides, select
Start > HP > HP Documentation.

NOTE:

When a device is connected to the jack, the computer

speakers are disabled.

NOTE:

Be sure that the device cable has a 4-conductor

connector that supports both audio-out (headphone) and audio-
in (microphone).

Top

TouchPad

Component

Description

(1)

TouchPad zone

Moves the pointer and selects or activates items on the screen.

(2)

Left TouchPad button

Functions like the left button on an external mouse.

(3)

Right TouchPad button

Functions like the right button on an external mouse.

Top

Summary of Contents for mt245



































































































Search results

Summary of Contents for mt245

Reviews:

Related manuals for mt245

Brands by name

Popular brands

HP mt245, Maintenance And Service Manual

Search results

Summary of Contents for mt245

Reviews:

Related manuals for mt245

Brands by name

Popular brands