HP mt245 Maintenance And Service Manual Download Page 31

Page: 31 / 98

Removal and replacement procedures for
Authorized Service Provider parts

CAUTION:

Components described in this chapter should only be accessed by an authorized service provider.

Accessing these parts can damage the computer or void the warranty.

NOTE:

HP continually improves and changes product parts. For complete and current information on

supported parts for your computer, go to

http://partsurfer.hp.com

, select your country or region, and then

follow the on-screen instructions.

Component replacement procedures

NOTE:

Details about your computer, including model, serial number, product key, and length of warranty,

are on the service tag at the bottom of your computer. See

Labels on page 12

for details.

This chapter provides removal and replacement procedures for Authorized Service Provider only parts.

There are as many as 54 screws that must be removed, replaced, or loosened when servicing Authorized
Service Provider only parts. Make special note of each screw size and location during removal and
replacement.

Component replacement procedures

Summary of Contents for mt245



































































































Search results

Summary of Contents for mt245

Reviews:

Related manuals for mt245

Brands by name

Popular brands

HP mt245, Maintenance And Service Manual

Search results

Summary of Contents for mt245

Reviews:

Related manuals for mt245

Brands by name

Popular brands