Overview of Server Installation
CAUTION:
If a third-party rack is used, observe the following additional
requirements to ensure adequate airflow and to prevent damage to the equipment:
·
Front and rear doors: If the 42U server rack includes closing front and rear
doors, ensure 5,350 sq cm (830 square inches) of holes are evenly distributed
from top to bottom to permit adequate airflow (equivalent to the required 64
percent open area for ventilation).
·
Side: The clearance between the installed rack component and the side panels
of the rack must be a minimum of 7 cm (2.75 inches).
Locating Materials
Locate the following materials that were shipped with the server:
Keyboard (not included with the rack model)
·
·
·
·
·
·
·
·
·
·
·
Mouse (not included with the rack model)
Power cord
Documentation and software packs inside the shipping box
Rack-mounting hardware (rack model only)
In addition to the supplied items, you may need:
Torx T-15 screwdriver
Hardware options
Ethernet cable
Operating system or application software
Uninterruptible Power Supply (UPS) or Power Distribution Unit (PDU)
Monitor
HP ProLiant ML350 Generation 3 Server Setup and Installation Guide
2-11
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: c-ch2 Overview of Server Installation.doc
Codename: Steel Venom Part Number: 316354-001 Last Saved On: 12/6/02 2:56 PM
