Server Configuration and Utilities
SmartStart Software
The SmartStart CD is used to load the system software, thereby achieving a
well-integrated server and ensuring maximum dependability and supportability. The
SmartStart CD contains diagnostic utilities and ROMPaq tools.
To install the SmartStart CD:
1.
Press the
F9
key to run RBSU and configure the primary operating system.
2.
Locate the SmartStart CD in the ProLiant Essentials Foundation pack.
3.
After the user powers up the server, press the CD-ROM drive eject button.
4.
Insert the SmartStart CD into the CD-ROM drive with the labeled side up.
Handle the CD by its edges, not by the flat surfaces of the disc.
5.
When the busy indicator turns green, the SmartStart sequence begins.
6.
Refer to the SmartStart documentation included with the server to install the
operating system, create updated driver diskettes, and run upgrade utilities.
SmartStart Diskette Builder
The SmartStart CD contains a utility to generate support diskettes in the event that
they are needed or the software cannot be used directly from the SmartStart CD.
Support diskettes are punched-out from data stored on the SmartStart CD. The
support diskettes include the following:
Array Configuration Utility (ACU)
·
·
·
·
·
Operating System support
Server utilities
Erase utility
System and Option ROMPaq diskettes
5-10
HP ProLiant ML350 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: f-ch5 Server Configuration and Utilities.doc
Codename: Steel Venom Part Number: 316354-001 Last Saved On: 12/9/02 8:26 AM
