HP ML350 - ProLiant - G2, Maintenance And Service Manual

Page: 47 / 78

Removal and replacement procedures 47
5.
Remove the PPM.
NOTE: The appearance of compatible PPMs may vary.
To replace the component, reverse the removal procedure.
FBDIMM
To remove the component:
1.
Power down the server (on page 26 ).
2.
Do one of the following:
•
Unlock and remove the bezel (" Front bezel " on page 27 ).
•
Extend the server from the rack (on page 26 ).
3.
Remove the access panel (" Access panel " on page 29 ).
4.
Remove the air baffle (" Air baffle " on page 33 ).