Hardware options installation 64
o
Full-height device
7.
Connect the data and power cables to the rear of the device.
8.
Slide the drive into the bay until it clicks.
9.
When shipping a server with a full-height device installed, replace the front guide screw with a shipping
screw ("
Installing the full-height media device shipping screw
" on page
64
).
10.
Install the access panel (on page
27
).
11.
Do one of the following:
o
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
Installing the full-height media device shipping screw
When shipping a server with a full-height media device installed, always install a shipping screw to secure
the device.
1.
Install the full-height media device ("
Installing a half-height or full-height media device
" on page
63
).
2.
Remove the front guide screw from the full-height media device.
Summary of Contents for ML350 - ProLiant - G2
Page 89: ...Hardware options installation 89 c Slide them back and away from the chassis ...
Page 112: ...Troubleshooting 112 ...
Page 137: ...Technical support 137 ...
Page 138: ...Technical support 138 ...
