Hardware options installation 57
Eight-bay SFF drive cage option
Before installing the optional SFF hard drive cage, you must install an optional SAS controller. See the
instructions that ship with the option.
CAUTION:
To avoid damage to the pin connectors, install only supported hard drive cages and
components in HP ProLiant ML350 G6 Servers. For supported options, see the QuickSpecs at the
HP website (
http://www.hp.com/servers/proliantml350
).
To install the component:
1.
Install the hard drive expansion cage power cable ("
Installing a hard drive expansion cage power
cable
" on page
54
).
2.
Remove the two bezel blanks closest to the primary hard drive cage.
3.
Using a T-15 Torx screwdriver, remove the sleeve from the optional hard drive cage.
4.
Connect the SAS cables to the optional hard drive cage.
Summary of Contents for ML350 - ProLiant - G2
Page 89: ...Hardware options installation 89 c Slide them back and away from the chassis ...
Page 112: ...Troubleshooting 112 ...
Page 137: ...Technical support 137 ...
Page 138: ...Technical support 138 ...
