Hardware options installation 62
o
The connector labeled "6LFF"of the mini-SAS Y-cable to the primary hard drive cage.
10.
Slide the optional hard drive cage fully into the bay until it clicks, and then install the screws.
CAUTION:
Always populate each media bay with either a device or a blank. Proper airflow can
only be maintained when the bays are populated. Unpopulated drive bays can lead to improper
cooling and thermal damage.
11.
Connect the common end of the mini-SAS Y-cable to the SAS connector B on the system board.
12.
Install any hard drives or blanks ("
SAS or SATA hard drive option
" on page
52
).
13.
Install the access panel (on page
27
).
14.
Do one of the following:
o
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
15.
Power up the server (on page
24
).
Summary of Contents for ML350 - ProLiant - G2
Page 89: ...Hardware options installation 89 c Slide them back and away from the chassis ...
Page 112: ...Troubleshooting 112 ...
Page 137: ...Technical support 137 ...
Page 138: ...Technical support 138 ...
