Rack Expansion Kit 48
b.
Using the other side of the door sensor cables included in the expansion rack, plug one side to the
front door sensor in the MCS 5042.
c.
Route the cable through the rear of the MCS 5042 behind to the expansion rack.
d.
Plug the other end of the cable into the bottom of the second front door sensor in the expansion rack.
e.
Use the cable ties in the kit to secure the cable and wind up any excessive cable.
f.
If necessary, press and hold the C key on the management module for five seconds, so it will detect
the additional door sensors of the expansion rack.
14.
At the top right corner in the expansion rack is the cable that provides power to the door release kit of
the expansion rack. Plug it into the output connector in the MCS 5042.
