Automatic Door Release Kit 22
electromagnetic lock assembly to the top of the rear rack frame, use a T-25 Torx screwdriver to insert
and tighten the two M5.5 self-tapping screws into the inner row of rack holes.
4.
Repeat steps 1 through 3 for the bottom, rear electromagnetic lock.
Installing the rear strike plates
1.
Align the strike plate bracket to the two studs on the top of the rear rack right door.
2.
Using an M5 socket driver, insert and tighten the two M5 nuts over the studs to attach the top strike plate
bracket to the top of the rear rack right door.
3.
Attach the strike plate assembly to the strike plate bracket (2).
a.
Using a hammer, insert the two roll pins into the two holes on the strike plate (4).
b.
Insert a flathead screw through the strike plate (1).
c.
Slide a rubber washer onto the flathead screw in between the strike plate and strike plate bracket
(3).
NOTE:
Do not tighten the strike plate too tightly to the strike plate bracket. The strike plate should
float on the rubber washer providing flexibility to align with the electromagnetic lock.
