Rack Expansion Kit 40
3.
To remove the panel that covers the cutout on the rear extension kit of the MCS 5042, remove the eight
(seven shown in the following illustration) thumb screws.
4.
Attach the gaskets, included in your kit contents, to the MCS 5042:
a.
Remove the liner backing from each gasket.
b.
Attach the two 1130-mm gaskets to the top and bottom frames on the side of the MCS 5042.
c.
Attach the three 1870-mm gaskets to the front, middle, and rear of the side of the MCS 5042.
