Hook Up Kit 31
3.
Use two wrenches to tighten the union an additional two flats. Be sure the direction of the elbow does
not change.
Attaching the main hoses to the MCS 5042 through
an opening in the raised floor
1.
Route the main hose through the opening in the raised floor at the opening in the bottom of the MCS
5042.
2.
Run the hoses up and connect them to the 90° elbow assembly.
3.
Hand-tighten the hoses to the 90° elbow assembly.
Callout
Component
Function
A
Main water
Removes hot water from the MCS 5042