2 - 8
KZM-6120 Mainboard Manual
1). Set System Jumpers
Clear CMOS: SW1-4
The CMOS RAM is powered by the onboard button cell battery. To clear the
RTC data: (1). Turn off your computer, (2). Enable this feature by setting the
SW1-4 to On position, (3). Turn on your computer to boot the system, (4).
Turn off the computer, (5). Disable the Clear CMOS feature, (6). Turn on the
computer. (7). Hold down the Delete key when boots and enter BIOS Setup to
re-enter user preferences.
Clear Password: SW1-5
This switch allows you to enable or to disable both the keyboard and system
password settings. You may need to adjust it if you forget your password. To
clear the password setting: (1). Turn off your computer, (2). Enable this feature
by setting the SW1-5 to On position, (3). Turn on your computer to boot
screen, (4). Turn off your computer, (5). Disable the Clear Password feature by
setting the SW1-5 to Off position, (6). Turn on your computer.