KZM-6120 Mainboard Manual
3 - 4
Quick Power On Self Test
When enabled, allows the BIOS to bypass the extensive memory test.
The options are: Enabled (Default), Disabled.
Boot From LAN First
This feature makes the system bootable by the remote server via LAN.
The options are: Enabled (Default), Disabled.
Boot Sequence
Allows the system BIOS to first try to boot the operating system from the
selected disk drive. The options are: A, C, SCSI (Default); C, A, SCSI; C,
CDROM, A; CDROM, C, A; D, A, SCSI; E, A, SCSI; F, A, SCSI; SCSI, A, C;
SCSI, C, A; C Only; LS/ZIP, C.
Swap Floppy Drive
Allows you to switch the order in which the operating system accesses
the floppy drives during boot up.
The options are: Enabled, Disabled (Default).
Boot Up Floppy Seek
When enabled, assigns the BIOS to perform floppy diskette drive tests by
issuing the time-consuming seek commands.
The options are: Enabled (Default), Disabled.
Boot Up Numlock Status
When set to On, allows the BIOS to automatically enable the Num Lock
Function when the system boots up. The options are: On (Default), Off.
Memory Parity Check
This feature enables BIOS to perform automatic memory checking upon
detection of ECC or parity DRAM.
The options are: Enabled, Disabled (Default).
When the feature set at Enabled, the system BIOS will allow other utilities
to access the Intel Pentium III serial number while they need to do so.
The settings are: Enabled (Default), Disabled.
Processor Number Feature
