HP Kayak XW A2-U2-W2, User Manual

Page: 70 / 154

3 Troubleshooting Your PC Workstation
If Your PC Workstation Does Not Start Properly
56 English
4 Check the following items:
5 Replace the cover.
6 Reconnect all cables and power cords.
7 Turn on the display and computer.
Rebuild Your PC
Workstation’s
Components
If your PC Workstation still does not start properly, remove all boards
and accessories, except the hard disk drive and video board. Start the
PC Workstation. If the PC Workstation now works, add the boards and
accessories one at a time to determine which one is causing the
problem.
If you are Unable to Change any Values in Setup
Ensure that you are using the correct password.
Action Reference
Check all internal cables. Ensure they are correctly attached and firmly in place.
Check that the processor is correctly
installed. Refer to “Installing a Processor” page 49.
Check that the processor speed
switches have been set correctly. Refer to “System Board Switches” page 93.
Check that the memory modules are
correctly installed. Refer to “Installing Memory” page 29.
Check that accessory boards are firmly
seated in their slots. Refer to “Installing Accessory Boards” page 46.
Verify that any switches and jumpers on
the accessory boards are properly set. Refer to the manuals that came with each board.
Check that the switches on the system
board are properly set. Refer to “System Board Switches” page 93.
rio.bk : rio-ug3.fb4 Page 56 Tuesday, August 19, 1997 4:40 PM