HP Kayak XW A2-U2-W2, User Manual

Page: 45 / 154

English 31
2 How to Install Accessories Inside Your PC Workstation
Installing Memory
9 Slide the memory module into the slot at 90° to the system board
(hold the memory module with the cutouts closest to the processor).
10 Firmly press the memory module completely into the connector
until the retaining clips click into position.
11 Repeat this procedure for each additional memory module you want
to install.
12 Install any other accessories if necessary, then replace all units and
reconnect all cables and power cords. Replace the cover (see page
23).
13 Check the HP Summary Screen to verify the new configuration
(refer to “The HP Summary Screen and Setup Program” on page 95).
Slide the memory module into the
slot at 90
o
to the system board
Push the module until the
retaining clips click into position
rio.bk : rio-ug2.fb4 Page 31 Tuesday, August 19, 1997 4:40 PM