HP Kayak XW A2-U2-W2, User Manual

Page: 102 / 154

4 Technical Information
The HP FastRAID Option
88 English
To reconfigure your ARO-1130 adapter and hard drives for use with
RAID 1, use the Array
Config utility contained on the Drivers CD-ROM.
For instructions on how to use the Array Config utility, refer to
Installing the HP FastRAID Accessory Kit. This guide is viewable
on-screen—it is provided in PDF format—and can be found in your PC
Workstation’s support documentation on the World Wide Web, from
http://www.hp.com./go/pcsupport
. (If you purchased the HP
FastRAID option as an accessory, the guide is a separate paper
booklet.)
Note that the Array Config utility must be run from a bootable diskette.
For more information on creating a bootable Array Config diskette and
configuring your ARO-1130 adapter, refer to the README file in the
FastRAID section of the Drivers CD-ROM.
Once the array has been created, you can use the CI/O Array Manager
utility (also contained on the Drivers CD-ROM) to manage and monitor
it. For instructions on how to use the CI/O Array Manager, refer to its
online documentation.
rio.bk : rio-ug4.fb4 Page 88 Tuesday, August 19, 1997 4:40 PM