2 How to Install Accessories Inside Your PC Workstation
Installing Accessory Boards
48
English
7
Secure the board by replacing the slot cover screw.
If you loosened the screws on adjacent slots, remember to tighten
them.
8
Install any other accessories before replacing the cover (see page
23). Reconnect all cables and power cords.
Completing the
Installation of an ISA
Accessory Board
If you have installed an ISA accessory board that uses any interrupt,
you must run the
Setup
program and reserve the IRQ for the accessory
board. This allows PCI devices to be automatically configured.
1
Turn on the PC Workstation and press
when
Setup
appears.
2
In the
Setup
program, select the Advanced menu and the PCI
Configuration submenu. A list of IRQs and the devices that use them
are displayed. Highlight the IRQ field you want to change, for
example
IRQ 11
.
3
You can use the space bar or press
or
to make the IRQ
available for PCI (
Available
) or make it unavailable for PCI
(
Reserved
).
4
Press
to save any changes you made and exit the
Setup
program.
NOTE
You should always leave at least one IRQ available for use by the
integrated PCI devices.
Secure the board
in position
rio.bk : rio-ug2.fb4 Page 48 Tuesday, August 19, 1997 4:40 PM
Summary of Contents for Kayak XW A2-U2-W2
Page 1: ...HP Kayak XW PC Workstation User s Guide rio bk cover fb4 Page 1 Monday August 18 1997 4 40 PM ...
Page 3: ...User s Guide rio bk title fb4 Page i Tuesday August 19 1997 4 40 PM ...
Page 8: ...vi English rio bk title fb4 Page vi Tuesday August 19 1997 4 40 PM ...
Page 140: ...126 English rio bk glossary fb4 Page 126 Tuesday August 19 1997 4 40 PM ...
