3 Troubleshooting Your PC Workstation
If Your PC Workstation Has a Hardware Problem
66
English
The CD-ROM Drive Does not Open
If you have difficulty removing a CD-ROM disk from the CD-ROM drive
(during a power failure for example), you can use the manual eject
button. To eject a CD-ROM disk using the manual eject button, proceed as
follows:
1
If the CD-ROM drive manual eject button is not visible, remove the
front bezel covering the drive. The manual eject button is inside a
small hole in the front of the CD-ROM drive.
2
With a thin, solid rod, such as the end of a paper clip, push the drive’s
manual eject button.
3
The drive door is released, opening slightly. Carefully pull it open
fully and retrieve the disk.
4
To close the drive door, push it gently closed without forcing it. The
drive door may not close completely until it is fully functional (for
example, when the power comes back on).
5
If required, replace the drive’s front bezel.
Using the manual eject feature.
The picture shows two possible
locations of the manual eject
button.
rio.bk : rio-ug3.fb4 Page 66 Tuesday, August 19, 1997 4:40 PM
Summary of Contents for Kayak XW A2-U2-W2
Page 1: ...HP Kayak XW PC Workstation User s Guide rio bk cover fb4 Page 1 Monday August 18 1997 4 40 PM ...
Page 3: ...User s Guide rio bk title fb4 Page i Tuesday August 19 1997 4 40 PM ...
Page 8: ...vi English rio bk title fb4 Page vi Tuesday August 19 1997 4 40 PM ...
Page 140: ...126 English rio bk glossary fb4 Page 126 Tuesday August 19 1997 4 40 PM ...