manualshive.com logo in svg

HP Kayak XU04, User Manual, Page: 71 / 96

Share
Download
HP Kayak XU04 User Manual Download Page 71

English

59

Appendix A   The Error Codes

0301h – 03FFh:

Floppy Disk Error Codes

0342h

Address mark not found in random test.

Floppy disk drive error.
Check your floppy disk drive is installed correctly.
If error persists, install new floppy disk drive.

0344h

Requested sector not found in random 
test.

Floppy disk drive error.
Check your floppy disk drive is installed correctly.
If error persists, install new floppy disk drive.

0345h

Reset failed in random test.

Floppy disk controller error.
Check your floppy disk drive is installed correctly.
If error persists, install new system board.

0347h

Drive parameter activity failed in random 
test.

Floppy disk drive or floppy disk controller error.
Check your floppy disk drive is installed correctly.
Install new floppy disk drive.
If error persists, install new system board.

0348h

DMA overrun error in random test.

Diagnostic test error.
Re-run the diagnostic tests.

0349h

Attempt to DMA in 64 KB boundary in 
random test.

Diagnostic test error.
Re-run the diagnostic tests.

0350h

CRC or ECC data error in random test.

Diagnostic test error.
Re-run the diagnostic tests.

0360h

Seek operation failed in random test.

Floppy disk drive or floppy disk controller error.
Check your floppy disk drive is installed correctly.
Install new floppy disk drive.
If error persists, install new system board.

0380h

Drive not ready.

Floppy disk drive error.
Check your floppy disk drive is installed correctly.
If error persists, install new floppy disk drive.

Code

Explanation

Details/Parts to Check

guard.bk : g-e-ref1.fb4  Page 59  Wednesday, June 30, 1999  3:06 PM

Summary of Contents for Kayak XU04

































































































Reviews:

No comments