manualshive.com logo in svg

HP Kayak XU04, User Manual, Page: 67 / 96

Share
Download
HP Kayak XU04 User Manual Download Page 67

English

55

Appendix A   The Error Codes

0201h – 02FFh:

Hard Disk Error Codes

0210h

CRC or ECC data error in sequential test.

Diagnostic test error.
Re-run the diagnostic tests.

0211h

ECC (Error Correction Coding) corrected 
data error.

Diagnostic test error.
Re-run the diagnostic tests.

0220h

Controller failure.

Hard disk controller error.
Check your hard disk drive is installed correctly.
If error persists, install new system board.

0240h

Seek operation failed.

Hard disk controller error.
Check your hard disk drive is installed correctly.
If error persists, install new system board.

0252h

Address mark not found in random test.

Re-enter the test parameters and re-run the test. 
If error persists, install new hard disk drive.

0254h

Requested sector not found in random 
test.

Re-enter the test parameters and re-run the test. 
If error persists, install new hard disk drive.

025Ah

Bad sector flag detected in random test.

Diagnostic test error.
Re-run the diagnostic tests.

0260h

CRC or ECC data error in random test.

Diagnostic test error.
Re-run the diagnostic tests.

0265h

Drive not ready in random test.

Hard disk error.
Check your hard disk drive is installed correctly.
If error persists, install new hard disk drive.

0275h

Data mismatch in random test.

Hard disk error.
Check your hard disk drive is installed correctly.
If error persists, install new hard disk drive.

0280h

Drive not ready in sequential test.

Hard disk error.
Check your hard disk drive is installed correctly.
If error persists, install new hard disk drive.

Code

Explanation

Details/Parts to Check

guard.bk : g-e-ref1.fb4  Page 55  Wednesday, June 30, 1999  3:06 PM

Summary of Contents for Kayak XU04

































































































Reviews:

No comments