manualshive.com logo in svg

HP Kayak XU04, User Manual, Page: 68 / 96

Share
Download
HP Kayak XU04 User Manual Download Page 68

Appendix A   The Error Codes

0201h – 02FFh:

Hard Disk Error Codes

56

English

0281h

All Sectors in Test Cylinder are bad.

Hard disk error.
Install new hard disk drive.

0290h

Drive is busy.

Re-run the diagnostic tests.

0293h

Command aborted.

The command is not supported by the device.
No action needed.

0295h

Data mismatch in sequential test.

Hard disk error.
Check your hard disk drive is installed correctly.
If error persists, install new hard disk drive.

0296h

Sleep error.

The command is not supported by the device.
No action needed.

02AAh

Drive not ready in sequential test.

Hard disk error.
Check your hard disk drive is installed correctly.
If error persists, install new hard disk drive.

02CCh

Bit 5 (write error bit) of the hard disk 
controller status register is set on 
completion of a write operation.

Hard disk or hard disk controller error.
Check your hard disk drive is installed correctly.
Install new hard disk drive.
If error persists, install new system board.

02EEh

The Performance test was run on a drive 
with less than 200 cylinders.

Hard disk configuration error.
Check the hard disk drive is correctly configured in 
the BIOS setup.
If possible, select a drive type with more than 200 
cylinders.

02F1H

Error in partition table.

Read error in disk partition area.
Format, or re-format, the partition.

02F3H

Boot sector error.

Format, or re-format, the partition.
If error persists, install new hard disk drive.

02F4H

Media error.

Format, or re-format, the partition.
If error persists, install new hard disk drive.

Code

Explanation

Details/Parts to Check

guard.bk : g-e-ref1.fb4  Page 56  Wednesday, June 30, 1999  3:06 PM

Summary of Contents for Kayak XU04

































































































Reviews:

No comments