2 How to Install Accessories In Your Minitower PC Workstation
Installing Mass Storage Devices
46
English
9
If you are installing a SCSI device, pass the SCSI cable through the
base of the SCSI holder. You will need to remove then replace the
SCSI holder to do this.
10
Slide the power supply back into position, and tighten the four self-
retaining screws (see page 32).
11
Remove the plastic panel from the cover by pulling the panel from
the left and unhinging its right-hand side. Store the panel in a safe
place.
12
Install any other accessories before replacing the cover and
completing the installation.
Pass the SCSI cable
through the base of
the SCSI holder
Unclip and lift out
the plastic panel
ashaki.bk : asham-2.fb4 Page 46 Thursday, September 10, 1998 5:58 PM