1 How to Install Accessories In Your Desktop PC Workstation
Installing Accessory Boards
22
English
4
Unscrew and remove the slot cover. Store it in a safe place.
If the slot cover is tight, loosen the screws on the adjacent slots.
5
Hold the board by its “top” edge. Slide it into the board guide of the
chosen slot. Do
not
bend the board.
6
Align the board’s connector with the slot’s socket. Firmly press the
board into the socket. Ensure the board’s connector engages
completely
with the socket and does not touch components on other
boards.
7
Secure the board by replacing the screw. If you loosened the screws
on adjacent slots, remember to tighten them.
8
Install any other accessories before replacing the cover (refer to
page 4).
9
Reconnect all cables and power cords.
Slide the accessory
board into position
ashaki.bk : ashak-2.fb4 Page 22 Thursday, September 10, 1998 5:58 PM
