English
7
1 How to Install Accessories In Your Desktop PC Workstation
Installing Memory
Installing Memory
Main Memory Modules
If you need more main memory to run your application software, you
can install up to 768 MB of memory in three 100 MHz DIMM slots.
Main memory upgrades are available in single non-buffered 32 MB,
64 MB and 128 MB or 256 MB SDRAM memory modules.
CAUTION
Static electricity can damage electronic components. Turn off
all equipment. Do not let your clothes touch the accessory.
To equalize the static electricity, rest the accessory bag on top
of the power supply while you are removing the accessory from
the bag. Handle the accessory as little as possible and with care.
To install a main memory module:
1
Disconnect the computer’s power cord and any LAN or
telecommunications cable.
2
Remove the computer’s cover (refer to page 3).
3
Press the retaining buttons on each side of the HP UltraFlow airflow
guide and remove it from the PC Workstation’s case.
Lift the HP UtraFlow
airflow guide forwards
and upwards.
ashaki.bk : ashak-2.fb4 Page 7 Thursday, September 10, 1998 5:58 PM
