HP Kayak XA, User Manual, Page: 98 / 148

4 Technical Information
The HP Summary Screen and Setup Program
88 English
When you press the HP Summary Screen (similar to that shown
below) appears:
This screen gives you a summary of the current configuration
settings of your PC Workstation.
Using the HP Setup Program
1 Turn on the display and then the computer. If the PC Workstation is
already turned on, save your data and exit all programs, then restart
the PC Workstation. Consult your operating system documentation
for any special instructions concerning turning off and then
restarting your PC Workstation.
HP PC WORKSTATION XA 6/xxx - Copyright 1997 Hewlett-Packard - 3.0
BIOS Version : HC.08.xx PC Serial Number : FR74011111
CPU Date Code : N/A LAN Mac Address : 00-60-B0-5D-C9-2D
System RAM : 64MB Processor Type : Pentium II
Bank A : 64MB COM1 : 3F8H
Bank B : None COM2 : None
Bank C : None COM3 : None
Bank D : Not available COM4 : None
System Cache : 512 KB (Synchronous) LPT1 : 378H
Video Device : Cirrus Logic LPT2 : None
1st IDE Device : CD-ROM LPT3 : None
2nd IDE Device : None Flexible Disk A : 1.44 MB
3rd IDE Device : None Flexible Disk B : None
4th IDE Device : None Display type : Not Available
ISA PnP : Not Installed PCI Slot #1 : PCI to PCI Bridge
ISA PnP : Not Installed PCI Slot #2 : Not Installed
PCI Slot #3 : Not Installed
<F1> to continue, <F2> to run Setup, <F10>to power off, <F5> to retain
mamdt4.fb4 Page 88 Tuesday, August 5, 1997 5:25 PM