34 HP Jetdirect Configuration Page
ENWW
83 DISCONNECTING
FROM SERVER
The server has been shut down because of a configuration
change or reset request. This message automatically clears
after a few seconds, unless the printer is offline, is in an error
state, or is servicing another I/O port or another network
protocol.
F1
TRYING TO
CONNECT TO
SERVER
The HP Jetdirect print server is trying to connect to the
NetWare server(s). This is a normal message. Wait until
either the connection is established or another status
message appears.
xx ERR TCP INFO
TIMERS ADJUSTED
The print server detected a DHCP lease error due to one of
the following conditions:
●
Renew time is less than 30 seconds.
●
Rebind time is less than 52 seconds.
●
Rebind time is less than, or equal to, the Renew time.
●
The lease duration is less than, or equal to, the Rebind
time.
Table 9.12
Error Messages (10 of 10)
Error Code and
Message
Description
Summary of Contents for J6039C - JetDirect 200M Print Server
