7.
To remove the battery from the top of the airflow guide, do the following.
a.
Push the battery retaining clip away from the battery (1) as shown in
Figure 6-42
.
b.
Slide the battery to disengage the battery posts from the slots on the airflow guide (2).
c.
Lift the battery off of the airflow guide.
Figure 6-42 Removing the Battery from the Airflow Guide
Removing the PCIe Expansion Board
To remove the PCIe expansion board, follow these steps:
1.
Power off the server and disconnect the power cables. See
“Powering On and Powering Off
the Server” (page 78)
.
2.
If rack mounted, slide the server completely out from the rack. See
“Extending the Server
from the Rack” (page 143)
.
3.
Remove the top cover. See
“Removing the Top Cover” (page 144)
.
4.
Pinch the board rail clips to the sides (1). See
Figure 6-43 “ Removing the PCIe Expansion
Board”
.
Removing and Replacing the Smart Array P400 Controller and PCIe Expansion Board
193
