HP HPE FlexNetwork 7500 series, Configuration Manual

Page: 520 / 592

508
Step Command Remarks
5. Set the specified
COMMUNITY attribute for
BGP routes.
apply community { none |
additive |
{ community-number &<1-32> |
aa:nn &<1-32> | internet |
no-advertise | no-export |
no-export-subconfed
}
*
[ additive ] }
By default, no community attribute is
set for BGP routes.
6. Set a cost for routes.
apply cost
[
+
|
-
] cost-value By default, no cost is set for routes.
7. Set a cost type for routes.
apply cost-type { external |
internal | type-1 | type-2 }
By default, no cost type is set for
routes.
8. Set the extended community
attribute for BGP routes.
apply extcommunity { rt
route-target }&<1-32>
[ additive ]
By default, no extended community
attribute is set for BGP routes.
9. Set the next hop for routes.
•
Set the next hop for IPv4
routes:
apply ip-address
next-hop
ip-address
[ public | vpn-instance
vpn-instance-name ]
•
Set the next hop for IPv6
routes:
apply ipv6 next-hop
ipv6-address
By default, no next hop is set for
IPv4 or IPv6 routes.
The
apply ip-address next-hop
and apply ipv6 next-hop
commands do not apply to
redistributed IPv4 and IPv6 routes.
10. Set an IP precedence for
matching routes.
apply ip-precedence { value |
clear }
By default, no IP precedence is set.
11. Redistribute routes to the
specified IS-IS level.
apply isis { level-1 | level-1-2
| level-2 }
By default, routes are not
redistributed into the specified IS-IS
level.
12. Set a local preference for BGP
routes.
apply local-preference
preference
By default, no local preference is set
for BGP routes.
13. Set MPLS labels.
apply mpls-label
By default, no MPLS label is set.
14. Set the ORIGIN attribute for
BGP routes.
apply origin { egp as-number
|
igp
|
incomplete
}
By default, no ORIGIN attribute is
set for BGP routes.
15. Set a preference.
apply preference preference
By default, no preference is set.
16. Set a preferred value for BGP
routes.
apply preferred-value
preferred-value
By default, no preferred value is set
for BGP routes.
17. Set a prefix priority.
apply prefix-priority { critical
| high | medium }
By default, no prefix priority is set,
which means the prefix priority is
low.
18. Set a local QoS ID for
matching routes.
apply qos-local-id
{ local-id-value | clear }
By default, no local QoS ID is set.
19. Set a tag value for IGP routes.
apply tag tag-value
By default, no tag value is set for
IGP routes.
20. Set a traffic index for BGP
routes.
apply traffic-index { value |
clear }
By default, no traffic index is set for
BGP routes.