507
Step
Command
Remarks
8.
Match routes having the
specified output interface.
if-match interface
{
interface-type
interface-number
}&<1-16>
By default, no output
interface match criterion is
configured.
This command is not
supported by BGP.
9.
Match BGP routes having the
specified local preference.
if-match local-preference
preference
By default, no local
preference is configured for
BGP routes.
10.
Match MAC addresses in EVI
IS-IS packets.
if-match mac-list
mac-list-name
By default, no MAC list
match criterion is configured.
The MAC list match criterion
applies only to EVI IS-IS. For
information about EVI IS-IS,
see
EVI Configuration Guide
.
11.
Match routes having MPLS
labels.
if-match mpls-label
By default, no MPLS label
match criterion is configured.
12.
Match routes having the
specified route type.
if-match route-type
{
external-type1
|
external-type1or2
|
external-type2
|
internal
|
is-is-level-1
|
is-is-level-2
|
nssa-external-type1
|
nssa-external-type1or2
|
nssa-external-type2
} *
By default, no route type
match criterion is configured.
13.
Match IGP routes having the
specified tag value.
if-match tag
tag-value
By default, no tag match
criterion is configured.
14.
Match VLANs in EVI IS-IS
packets.
if-match vlan
vlan-list
By default, no VLAN match
criterion is configured.
The VLAN match criterion
applies only to EVI IS-IS. For
information about EVI IS-IS,
see
EVI Configuration Guide
.
Configuring apply clauses
Except for the
apply
commands used for setting the next hop for IPv4 and IPv6 routes, all
apply
commands are the same for IPv4 and IPv6 routing.
To configure
apply
clauses:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter routing policy node
view.
route-policy
route-policy-name
{
deny
|
permit
}
node
node-number
N/A
3.
Set the AS_PATH attribute for
BGP routes.
apply as-path
as-number
&<1-32> [
replace
]
By default, no AS_PATH attribute is
set for BGP routes.
4.
Delete the specified
COMMUNITY attribute for
BGP routes.
apply comm-list
{
comm-list-number
|
comm-list-name
}
delete
By default, no COMMUNITY
attribute is deleted for BGP routes.
Summary of Contents for HPE FlexNetwork 7500 series
Page 505: ...493 Connector N A ...
